This calculator can be utilized by anyone that needs section property or load data for any Allied galvanized tube size. This calculator will compute section properties, beam load and column load data for all Allied’s galvanized tube sizes.
Calculator Results Disclaimer
The results provided herein were generated using recognized engineering principles and are for informational purposes only. All information is provided as is, exclusive of any warranty, including, without limitation, any implied warranty of merchantability, fitness for a particular purpose, or any other warranty, whether expressed or implied. This information may not be used or relied upon for any specific application without competent professional examination and verification of its accuracy, suitability or applicability by a licensed professional engineer. The section property and load values provided herein are based on nominal material thickness and square corners. The calculated section property values do not comply with the AISI or AISC specifications since minimum material thickness and rounded corners were not used. If gross and effective section property values are required, please contact Allied Tube & Conduit®’s Mechanical Tube & Pipe Division. The undersigned agrees to indemnify and hold harmless Allied and its directors, officers, employees, agents, representatives and affiliates from any claims, damages or costs asserted against Allied arising out of any unauthorized use of this information.